Tisah Afiatul Inayah F14090049

link untuk mendownload Script dan gambar ada di bawah ini:

http://www.mediafire.com/download.php?0g0mdlm7b12ijdq

 

Script Rancangan Teknik Greenhouse

Command:

Select objects: 1 found, 4 total

Select objects: 1 found, 5 total

Select objects:

Command: z

ZOOM

Specify corner of window, enter a scale factor (nX or nXP), or

[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: w

Specify first corner: Specify opposite corner:

Command: solidedit

Solids editing automatic checking:  SOLIDCHECK=1

Enter a solids editing option [Face/Edge/Body/Undo/eXit] <eXit>: f

Enter a face editing option

[Extrude/Move/Rotate/Offset/Taper/Delete/Copy/coLor/mAterial/Undo/eXit] <eXit>:

e

Select faces or [Undo/Remove]: 1 face found.

Select faces or [Undo/Remove/ALL]:

Specify height of extrusion or [Path]: 25

Specify angle of taper for extrusion <0>:

Solid validation started.

Solid validation completed.

Enter a face editing option

[Extrude/Move/Rotate/Offset/Taper/Delete/Copy/coLor/mAterial/Undo/eXit] <eXit>:

*Cancel*

Command: _-view Enter an option

[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _left

Command: _-view Enter an option

[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _swiso

Command:

Command: *Cancel*

Command: z

ZOOM

Specify corner of window, enter a scale factor (nX or nXP), or

[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: w

Specify first corner: Specify opposite corner:

Command: solidedit

Solids editing automatic checking:  SOLIDCHECK=1

Enter a solids editing option [Face/Edge/Body/Undo/eXit] <eXit>: f

Enter a face editing option

[Extrude/Move/Rotate/Offset/Taper/Delete/Copy/coLor/mAterial/Undo/eXit] <eXit>:

e

Select faces or [Undo/Remove]: 1 face found.

Select faces or [Undo/Remove/ALL]:

Specify height of extrusion or [Path]: 25

Specify angle of taper for extrusion <0>:

Solid validation started.

Solid validation completed.

Enter a face editing option

[Extrude/Move/Rotate/Offset/Taper/Delete/Copy/coLor/mAterial/Undo/eXit] <eXit>:

*Cancel*

Command: z

ZOOM

Specify corner of window, enter a scale factor (nX or nXP), or

[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: a

Command: solidedit

Solids editing automatic checking:  SOLIDCHECK=1

Enter a solids editing option [Face/Edge/Body/Undo/eXit] <eXit>: f

Enter a face editing option

[Extrude/Move/Rotate/Offset/Taper/Delete/Copy/coLor/mAterial/Undo/eXit] <eXit>:

e

Select faces or [Undo/Remove]: *Cancel*

Command: z

ZOOM

Specify corner of window, enter a scale factor (nX or nXP), or

[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: w

Specify first corner: Specify opposite corner:

Command: SOLIDEDIT

Solids editing automatic checking:  SOLIDCHECK=1

Enter a solids editing option [Face/Edge/Body/Undo/eXit] <eXit>: f

Enter a face editing option

[Extrude/Move/Rotate/Offset/Taper/Delete/Copy/coLor/mAterial/Undo/eXit] <eXit>:

e

Select faces or [Undo/Remove]: 1 face found.

Select faces or [Undo/Remove/ALL]:

Specify height of extrusion or [Path]: 25

Specify angle of taper for extrusion <0>:

Solid validation started.

Solid validation completed.

Enter a face editing option

[Extrude/Move/Rotate/Offset/Taper/Delete/Copy/coLor/mAterial/Undo/eXit] <eXit>:

*Cancel*

Command: z

ZOOM

Specify corner of window, enter a scale factor (nX or nXP), or

[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: a

Command: union

Select objects: 1 found

Select objects: 1 found, 2 total

Select objects:

Command: _-view Enter an option

[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _left

Command: move

1 found

Specify base point or [Displacement] <Displacement>: Specify second point or

<use first point as displacement>: 50

Command: copy

2 found

Specify base point or [Displacement] <Displacement>: Specify second point or

<use first point as displacement>: 50

Specify second point or [Exit/Undo] <Exit>: *Cancel*

Command: *Cancel*

Command: slice

Select objects to slice: 1 found

Select objects to slice:

Specify start point of slicing plane or [planar

Object/Surface/Zaxis/View/XY/YZ/ZX/3points] <3points>:

Specify second point on plane:

Specify a point on desired side or [keep Both sides] <Both>:

Command: _.erase 1 found

Command: SLICE

Select objects to slice: 1 found

Select objects to slice:

Specify start point of slicing plane or [planar

Object/Surface/Zaxis/View/XY/YZ/ZX/3points] <3points>:

Specify second point on plane:

Specify a point on desired side or [keep Both sides] <Both>

Command: _.erase 1 found

Command:

Command: *Cancel*

Command: copy

2 found

Specify base point or [Displacement] <Displacement>: Specify second point or

<use first point as displacement>: 220

Specify second point or [Exit/Undo] <Exit>: *Cancel*

Command: orbit

3DORBIT Press ESC or ENTER to exit, or right-click to display shortcut-menu.

Command: _-view Enter an option

[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _swiso

Command: copy

5 found

Specify base point or [Displacement] <Displacement>: Specify second point or

<use first point as displacement>: 100

Specify second point or [Exit/Undo] <Exit>: 100

Specify second point or [Exit/Undo] <Exit>: _u

Specify second point or [Exit/Undo] <Exit>: 100

Specify second point or [Exit/Undo] <Exit>: 200

Specify second point or [Exit/Undo] <Exit>: 300

Specify second point or [Exit/Undo] <Exit>: 400

Specify second point or [Exit/Undo] <Exit>: 500

Specify second point or [Exit/Undo] <Exit>: 600

Specify second point or [Exit/Undo] <Exit>: 700

Specify second point or [Exit/Undo] <Exit>: 800

Specify second point or [Exit/Undo] <Exit>: 900

Specify second point or [Exit/Undo] <Exit>: *Cancel*

Command: _u COPY

Command: _u SW Isometric GROUP

Command: _-view Enter an option

[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _swiso

Command: z

ZOOM

Specify corner of window, enter a scale factor (nX or nXP), or

[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: q

Requires a distance, numberX, or option keyword.

Specify corner of window, enter a scale factor (nX or nXP), or

[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>:

Specify opposite corner:

Command: copy

5 found

Specify base point or [Displacement] <Displacement>: Specify second point or

<use first point as displacement>: 100

Specify second point or [Exit/Undo] <Exit>: 200

Specify second point or [Exit/Undo] <Exit>: 400

Specify second point or [Exit/Undo] <Exit>: 600

Specify second point or [Exit/Undo] <Exit>: 800

Specify second point or [Exit/Undo] <Exit>: 100

Specify second point or [Exit/Undo] <Exit>: 1200

Specify second point or [Exit/Undo] <Exit>: 1600

Specify second point or [Exit/Undo] <Exit>: 1800

Specify second point or [Exit/Undo] <Exit>: 200

Specify second point or [Exit/Undo] <Exit>: _u

Specify second point or [Exit/Undo] <Exit>: *Cancel*

Command: _u COPY

Command: copy

5 found

Specify base point or [Displacement] <Displacement>: Specify second point or

<use first point as displacement>: 100

Specify second point or [Exit/Undo] <Exit>: 200

Specify second point or [Exit/Undo] <Exit>: 400

Specify second point or [Exit/Undo] <Exit>: 600

Specify second point or [Exit/Undo] <Exit>: 800

Specify second point or [Exit/Undo] <Exit>: 1000

Specify second point or [Exit/Undo] <Exit>: 1200

Specify second point or [Exit/Undo] <Exit>: 1400

Specify second point or [Exit/Undo] <Exit>: 1600

Specify second point or [Exit/Undo] <Exit>: 1800

Specify second point or [Exit/Undo] <Exit>: 2000

Specify second point or [Exit/Undo] <Exit>: 2200

Specify second point or [Exit/Undo] <Exit>: 2400

Specify second point or [Exit/Undo] <Exit>: 2600

Specify second point or [Exit/Undo] <Exit>: 2800

Specify second point or [Exit/Undo] <Exit>: 3000

Specify second point or [Exit/Undo] <Exit>: 3200

Specify second point or [Exit/Undo] <Exit>: 3300

Specify second point or [Exit/Undo] <Exit>: *Cancel*

Command: copy

3 found

Specify base point or [Displacement] <Displacement>: Specify second point or

<use first point as displacement>: 3200

Specify second point or [Exit/Undo] <Exit>: *Cancel*

Command: _-view Enter an option

[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _left

Command: z

ZOOM

Specify corner of window, enter a scale factor (nX or nXP), or

[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: a

Regenerating model.

Command: _-view Enter an option

[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _swiso

Command: _qsave

Command: _copyclip

Select objects: *Cancel*

ZOOM

Specify corner of window, enter a scale factor (nX or nXP), or

[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: w

Specify first corner: Specify opposite corner:

Command:

Command: move

1 found

Specify base point or [Displacement] <Displacement>: Specify second point or

<use first point as displacement>:

Command: z

ZOOM

Specify corner of window, enter a scale factor (nX or nXP), or

[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: a

Command: z

ZOOM

Specify corner of window, enter a scale factor (nX or nXP), or

[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: w

Specify first corner: Specify opposite corner:

Command: z

ZOOM

Specify corner of window, enter a scale factor (nX or nXP), or

[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: a

Command: z

ZOOM

Specify corner of window, enter a scale factor (nX or nXP), or

[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: w

Specify first corner: Specify opposite corner:

Command: copy

1 found

Specify base point or [Displacement] <Displacement>: Specify second point or

<use first point as displacement>: 1600

Specify second point or [Exit/Undo] <Exit>: *Cancel*

Command: p

PAN

Command: z

ZOOM

Specify corner of window, enter a scale factor (nX or nXP), or

[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: w

Specify first corner: Specify opposite corner:

Command: move

1 found

Specify base point or [Displacement] <Displacement>: Specify second point or

<use first point as displacement>:

Command: orbit

3DORBIT Press ESC or ENTER to exit, or right-click to display shortcut-menu.

Command: _vscurrent

Enter an option [2dwireframe/3dwireframe/3dHidden/Realistic/Conceptual/Other]

<3dwireframe>: _R

Command: *Cancel*

Command: z

ZOOM

Specify corner of window, enter a scale factor (nX or nXP), or

[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: a

Command: z

ZOOM

Specify corner of window, enter a scale factor (nX or nXP), or

[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: w

Specify first corner: Specify opposite corner:

Command: orbit

3DORBIT Press ESC or ENTER to exit, or right-click to display shortcut-menu.

Command: z

ZOOM

Specify corner of window, enter a scale factor (nX or nXP), or

[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: w

Specify first corner: Specify opposite corner:

Command: *Cancel*

Command: *Cancel*

Command: z

ZOOM

Specify corner of window, enter a scale factor (nX or nXP), or

[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: a

 

Command: _-view Enter an option

[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _swiso

 

Command: _vscurrent

Enter an option [2dwireframe/3dwireframe/3dHidden/Realistic/Conceptual/Other]

<Realistic>: _3

Command: Specify opposite corner:

Command: _-view Enter an option

[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _left

Command: p

PAN

Command: z

ZOOM

Specify corner of window, enter a scale factor (nX or nXP), or

[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: w

Specify first corner: Specify opposite corner:

Command: *Cancel*

Command: 3dpoly

Specify start point of polyline:

Checking 703 intersections…

Specify endpoint of line or [Undo]: *Cancel*

Command: 3DPOLY

Specify start point of polyline: *Cancel*

Command: orbit

3DORBIT Press ESC or ENTER to exit, or right-click to display shortcut-menu.

Command: z

ZOOM

Specify corner of window, enter a scale factor (nX or nXP), or

[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: a

Command: z

ZOOM

Specify corner of window, enter a scale factor (nX or nXP), or

[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: w

Specify first corner: Specify opposite corner:

Command: 3dpoly

Specify start point of polyline:

Specify endpoint of line or [Undo]: -1

Specify endpoint of line or [Undo]: 1

Specify endpoint of line or [Close/Undo]: 1

Specify endpoint of line or [Close/Undo]: c

Command:

Command: ext

EXTRUDE

Current wire frame density:  ISOLINES=41 found

Specify height of extrusion or [Direction/Path/Taper angle] <400.0000>: 3400

Command: orbit

3DORBIT Press ESC or ENTER to exit, or right-click to display shortcut-menu.

Command: z

ZOOM

Specify corner of window, enter a scale factor (nX or nXP), or

[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: w

Specify first corner: Specify opposite corner:

Command: solidedit

Solids editing automatic checking:  SOLIDCHECK=1

Enter a solids editing option [Face/Edge/Body/Undo/eXit] <eXit>: f

Enter a face editing option

[Extrude/Move/Rotate/Offset/Taper/Delete/Copy/coLor/mAterial/Undo/eXit] <eXit>:

e

Select faces or [Undo/Remove]: 1 face found.

Select faces or [Undo/Remove/ALL]:

Specify height of extrusion or [Path]: 1000

Specify angle of taper for extrusion <0>:

Solid validation started.

Solid validation completed.

Enter a face editing option

[Extrude/Move/Rotate/Offset/Taper/Delete/Copy/coLor/mAterial/Undo/eXit] <eXit>:

*Cancel*

Command: z

ZOOM

Specify corner of window, enter a scale factor (nX or nXP), or

[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: a

Command:

Command:

Command: _-view Enter an option

[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _left

Command:

Command: mirror

1 found

Specify first point of mirror line:

Too many objects selected for INTERSECT

Specify second point of mirror line:

Erase source objects? [Yes/No] <N>:

Command:

Command: slice

Select objects to slice: 1 found

Select objects to slice:

Specify start point of slicing plane or [planar

Object/Surface/Zaxis/View/XY/YZ/ZX/3points] <3points>: *Cancel*

Command: z

ZOOM

Specify corner of window, enter a scale factor (nX or nXP), or

[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: w

Specify first corner: Specify opposite corner:

Command: slice

Select objects to slice: 1 found

Select objects to slice:

Specify start point of slicing plane or [planar

Object/Surface/Zaxis/View/XY/YZ/ZX/3points] <3points>:

Specify second point on plane:

Specify a point on desired side or [keep Both sides] <Both>:

Command:

Command: _.erase 1 found

Command: _u ERASE

Command: SLICE

Select objects to slice: 1 found

Select objects to slice:

Specify start point of slicing plane or [planar

Object/Surface/Zaxis/View/XY/YZ/ZX/3points] <3points>:

Specify second point on plane:

Specify a point on desired side or [keep Both sides] <Both>:

Automatic save to C:\Users\SAPTOA~1\AppData\Local\Temp\GH Ririn n

tisah_1_1_0041.sv$ …

Command:

Command:

Command:

Command: _.erase 2 found

Command: z

ZOOM

Specify corner of window, enter a scale factor (nX or nXP), or

[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: a

Command:

Command:

Command: copy

2 found

Specify base point or [Displacement] <Displacement>: Specify second point or

<use first point as displacement>: 50

Specify second point or [Exit/Undo] <Exit>: *Cancel*

Command: slice

Select objects to slice: 1 found

Select objects to slice:

Specify start point of slicing plane or [planar

Object/Surface/Zaxis/View/XY/YZ/ZX/3points] <3points>:

Too many objects selected for INTERSECT

Specify second point on plane:

Specify a point on desired side or [keep Both sides] <Both>:

Command:

Command: _.erase 1 found

Command: slice

Select objects to slice: 1 found

Select objects to slice:

Specify start point of slicing plane or [planar

Object/Surface/Zaxis/View/XY/YZ/ZX/3points] <3points>:

Too many objects selected for INTERSECT

Specify second point on plane:

Specify a point on desired side or [keep Both sides] <Both>:

Command:

Command: _.erase 1 found

Command: _-view Enter an option

[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _swiso

Command: z

ZOOM

Specify corner of window, enter a scale factor (nX or nXP), or

[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: w

Specify first corner: Specify opposite corner:

Command:

Command: *Cancel*

Command: _vscurrent

Enter an option [2dwireframe/3dwireframe/3dHidden/Realistic/Conceptual/Other]

<3dwireframe>: _C

Select objects:

Select objects or [Undo]:

Command:

Select objects:

Select objects or [Undo]:

Select objects or [Undo]:

Select objects or [Undo]:

Select objects or [Undo]:

Command: orbit

3DORBIT Press ESC or ENTER to exit, or right-click to display shortcut-menu.

Command: _vscurrent

Enter an option [2dwireframe/3dwireframe/3dHidden/Realistic/Conceptual/Other]

<Conceptual>: _C

Command: _vscurrent

Enter an option [2dwireframe/3dwireframe/3dHidden/Realistic/Conceptual/Other]

<Conceptual>: _R

Command: _-view Enter an option

[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _swiso

Command: z

ZOOM

Specify corner of window, enter a scale factor (nX or nXP), or

[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: a

Command: _ai_selall Selecting objects…done.

Command: _-view Enter an option

[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _bottom

Command: _rectang

Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]:

Too many objects selected for INTERSECT

Specify other corner point or [Area/Dimensions/Rotation]:

Too many objects selected for INTERSECT

Command: ‘_zoom

Specify corner of window, enter a scale factor (nX or nXP), or

[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: .5x

Command: _rectang

Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]:

Too many objects selected for INTERSECT

Specify other corner point or [Area/Dimensions/Rotation]:

Too many objects selected for INTERSECT

Select objects or [Undo]: Specify opposite corner: *Cancel*

Command: _-view Enter an option

[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _seiso

Command: _-view Enter an option

[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _bottom

Command: ‘_zoom

Specify corner of window, enter a scale factor (nX or nXP), or

[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: .5x

Command: extrude

Current wire frame density:  ISOLINES=4

Select objects to extrude: 1 found

Select objects to extrude: 20

Specify opposite corner: 0 found

Select objects to extrude: *Cancel*

Command: _-view Enter an option

[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _seiso

Command: _-view Enter an option

[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _bottom

Command: ‘_zoom

Specify corner of window, enter a scale factor (nX or nXP), or

[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: .5x

Select objects or [Undo]:

Select objects or [Undo]: *Cancel*

Command: _-view Enter an option

[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _seiso

Command:  <Switching to: Model>

Restoring cached viewports.

 

Command:

Command:

Command: _plot

Command: *Cancel*

 

Command: *Cancel*

 

Command:  <Switching to: Layout1>

Restoring cached viewports – Regenerating layout.

 

Command: *Cancel*

 

Command: *Cancel*

 

Command:  <New layout>

 

Command: Specify opposite corner: *Cancel*

 

Command: *Cancel*

 

Command: *Cancel*

 

Command:  <Switching to: Layout2>

Restoring cached viewports – Regenerating layout.

 

Command: *Cancel*

 

Command: *Cancel*

 

Command:  <Switching to: Layout1>

Restoring cached viewports – Regenerating layout.

 

Command: *Cancel*

 

Command: *Cancel*

 

Command:  <Switching to: Model>

Restoring cached viewports.

 

Command: *Cancel*

 

Command: *Cancel*

 

Command:  <Switching to: Layout1>

Restoring cached viewports – Regenerating layout.

 

Command: Specify opposite corner:

Command:

Command:

Command: _+vports

Tab index <0>: 0

Specify first corner or [Fit] <Fit>: *Cancel*

 

Command: *Cancel*

 

Command:  <Switching to: Layout3>

Regenerating layout.

 

Command: *Cancel*

 

Command: *Cancel*

 

Command:  <Switching to: Layout1>

Restoring cached viewports – Regenerating layout.

 

Command: _.PLOT

Command: *Cancel*

 

Command: *Cancel*

 

Command:  <Layout from Template>

 

Command: *Cancel*

 

Command: *Cancel*

 

Command:  <New layout>

 

Command: *Cancel*

 

Command: *Cancel*

 

Command:  <Switching to: Layout4>

Regenerating layout.

 

Command: *Cancel*

 

Command: *Cancel*

 

Command:  <Switching to: Layout3>

Restoring cached viewports – Regenerating layout.

 

Command: Specify opposite corner:

Command:

Command: _.erase 1 found

 

Command:

Command:

Command: _+vports

Tab index <0>: 0

Specify first corner or [Fit] <Fit>:

Specify opposite corner: Regenerating layout.

 

Command: *Cancel*

 

Command: *Cancel*

 

Command:  <Switching to: Layout4>

Restoring cached viewports – Regenerating layout.

 

Command:

Command: _.erase 1 found

 

Command: *Cancel*

 

Command: *Cancel*

 

Command:  <Layout from Template>

 

Command: *Cancel*

 

Command: *Cancel*

 

Command:  <Switching to: ISO A1 Layout>

Regenerating layout.

Regenerating model – caching viewports.

 

Command: Specify opposite corner:

Command: *Cancel*

 

Command: _.MSPACE

Command:

Command:

Command: _+vports

Tab index <0>: 0

Switching to Paper space.

Specify first corner or [Fit] <Fit>:

Specify opposite corner: Regenerating model.

Regenerating layout.

Regenerating model.

 

Switching to Model space.

Command: ‘_pan *Cancel*

 

Command: _.PSPACE

Command: Specify opposite corner:

Command:

Command: *Cancel*

 

Command: Specify opposite corner: *Cancel*

 

Command: Specify opposite corner: *Cancel*

 

Command: _.MSPACE

Command: Specify opposite corner:

Command: Specify opposite corner:

Command: *Cancel*

 

Command: Specify opposite corner:

Command: Specify opposite corner:

Command: Specify opposite corner: *Cancel*

 

Command: Specify opposite corner:

Command: Specify opposite corner:

Command: Specify opposite corner:

Command: Specify opposite corner:

Command: Specify opposite corner:

Command: Specify opposite corner:

Command: Specify opposite corner:

Command: Specify opposite corner:

Command:

Viewport is view-locked. Switching to Paper space.

 

Switching back to Model space.

 

Command:

Viewport is view-locked. Switching to Paper space.

 

Switching back to Model space.

 

Command:

Viewport is view-locked. Switching to Paper space.

 

Switching back to Model space.

 

Command:

Viewport is view-locked. Switching to Paper space.

 

Switching back to Model space.

 

Command: *Cancel*

 

Command: *Cancel*

 

Command:  <Switching to: Layout2>

Restoring cached viewports – Regenerating layout.

 

Command:

Command: *Cancel*

 

Command: *Cancel*

 

Command:  <Switching to: Layout1>

Restoring cached viewports – Regenerating layout.

 

Command:

Command: *Cancel*

 

Command: *Cancel*

 

Command:  <Switching to: Layout3>

Restoring cached viewports – Regenerating layout.

 

Command:

Command: *Cancel*

 

Command: *Cancel*

 

Command:  <Switching to: ISO A1 Layout>

Restoring cached viewports – Regenerating layout.

 

Command:

Viewport is view-locked. Switching to Paper space.

 

Switching back to Model space.

 

Command:

Viewport is view-locked. Switching to Paper space.

 

Switching back to Model space.

 

Command:

Viewport is view-locked. Switching to Paper space.

 

Switching back to Model space.

 

Viewport is view-locked. Switching to Paper space.

 

Switching back to Model space.

 

Command:

Viewport is view-locked. Switching to Paper space.

 

Switching back to Model space.

 

Command:

Viewport is view-locked. Switching to Paper space.

 

Switching back to Model space.

 

Command:

Viewport is view-locked. Switching to Paper space.

 

Switching back to Model space.

 

Command:

Viewport is view-locked. Switching to Paper space.

 

Switching back to Model space.

 

Command:

Viewport is view-locked. Switching to Paper space.

 

Switching back to Model space.

 

Command:

Viewport is view-locked. Switching to Paper space.

 

Switching back to Model space.

 

Command:

Command: _mtext Current text style:  “Standard”  Text height:  0.2000

Annotative:  No

Specify first corner:

Specify opposite corner or [Height/Justify/Line

spacing/Rotation/Style/Width/Columns]:

 

Automatic save to C:\Users\User\appdata\local\temp\tugas greenhouse

gamtek_1_3_0041.sv$ …

 

Command:

Command:

Viewport is view-locked. Switching to Paper space.

 

Switching back to Model space.

 

Command:

Viewport is view-locked. Switching to Paper space.

 

Switching back to Model space.

 

Viewport is view-locked. Switching to Paper space.

 

Switching back to Model space.

 

Viewport is view-locked. Switching to Paper space.

 

Switching back to Model space.

_u Scroll Scroll Scroll INTELLIZOOM

Command:

Command:

Command: _mtext Current text style:  “Standard”  Text height:  0.2000

Annotative:  No

Specify first corner: *Cancel*

 

 

Command:

Command:

Command: _mtext Current text style:  “Standard”  Text height:  0.2000

Annotative:  No

Specify first corner:

 

Invalid point.

Specify first corner:

Specify opposite corner or [Height/Justify/Line

spacing/Rotation/Style/Width/Columns]:

 

Command:

Command:

 

** STRETCH **

Specify stretch point or [Base point/Copy/Undo/eXit]: *Cancel*

 

Command: *Cancel*

 

Command:

Command:

Command:

Command: _mtedit

Command:

MTEDIT Select an MTEXT object:

Command: Specify opposite corner:

Command: _.erase 2 found

 

Command: _u INTELLIZOOM

Command: _u ERASE

Command:

Command:

Command: _find Regenerating layout.

 

Command: Specify opposite corner:

Command:

Command:

Command: _plot

Press ESC or ENTER to exit, or right-click to display shortcut menu.

 

Press ESC or ENTER to exit, or right-click to display shortcut menu.

 

Specify window for printing

Specify first corner: *Cancel*

 

Specify first corner: Specify opposite corner:

Press ESC or ENTER to exit, or right-click to display shortcut menu.

 

Press ESC or ENTER to exit, or right-click to display shortcut menu.

 

Press ESC or ENTER to exit, or right-click to display shortcut menu.

 

Press ESC or ENTER to exit, or right-click to display shortcut menu.

 

Command:

Command:

Command: _plot

Specify window for printing

Specify first corner: Specify opposite corner:

Press ESC or ENTER to exit, or right-click to display shortcut menu.

 

Press ESC or ENTER to exit, or right-click to display shortcut menu.

Effective plotting area:  246.64 wide by 174.41 high

Effective plotting area:  232.75 wide by 159.60 high

 

Plotting viewport 2.

Effective plotting area:  116.88 wide by 74.80 high

Effective plotting area:  116.88 wide by 74.80 high

Effective plotting area:  116.88 wide by 74.76 high

Effective plotting area:  116.88 wide by 74.76 high

 

Plotting viewport 1.

 

Al Quran + Science

Al Quran And Science